The Castledene

The Castledene
Christmas Sale - 7.5% Off Orders Placed Online Over £150.00. - Ends On 31st Dec 2008

Flat white topped canopy with a smooth white fascia and a dentil moulding finish with an integral gutter system or supplied as a solid flat top Standard sizes 1.550m and 2.050m x 500mm . Sizes quoted are the external sizes.

Uuse drop down box for prices and options

(Optional brackets shown in picture see below)

Looking from the front select to have a down pipe from the integral guttering on the left or right hand side, or you can have a solid roof with no guttering choose from the options in the drop down box.

Brackets BRG05 can be used with this canopy to order see below.

This canopy is also available made to measure the min order value is for 2msq = £489.65 and it is £235 per extra square meter or part metre after that Orders must be placed by fax or by post for all made to measure items.

Castledene Door Canopy This door canopy has a dentil detailed fascia, picking out crisp denture features around all edges. The Castledene can be made to any size and can also be used for bay roof combinations. Normally with a built-in gutter, this can be filled in to form a solid roof with no gutter, if required. Many of our GRP corbels/brackets or columns can be used to create something unique to your own requirements. Available in white or brown.
	Standard widths : 1550 x 500mm & 2050 x 500mm They can be made to a maximum of : 5450mm by (up to) 2860mm deep OR 4910mm by (up to) 3380mm deep.

Mark out and pre-drill 6mm holes at approx 300mm centres along the door canopy flanges
Offer canopy up to the wall and centralise it above the door opening. Mark off the position on the wall for the bracket assembly (if brackets are to be fitted). Make sure you markings are straight and level.
Offer the bracket up to the wall at each side of the door opening. Drill and plug the wall using a 7mm masonry drill bit. Screw the bracket to the wall using 3" screws and plugs supplied.
Lift the canopy onto the brackets and centralise over the door opening. Drill and plug the wall as before, this time using 2"screws and plugs supplied.
Cover all visible screw heads with the appropriate coloured screw caps.
Clean canopy using soap and water or a non-abrasive cleaner.
Seal canopy to the wall using and appropriate colour sealer. (Sealer is not supplied).
Your over door canopy is maintenance-free, however we recommend regular cleaning with soap and water to maintain it's good looks for many years to come.

Care should be taken to check the canopy for cracking or damage before you sign for it.